CNC Machining Services

Custom milled and turned parts for prototypes, fixtures and production. Share your drawings for a review of geometry, material and tolerances.

Upload your drawings
Close-up of CNC-machined aluminum components

CNC machining capabilities

We review each drawing to confirm the setup, tool access and inspection requirements.

3-axis milling

A starting point for pockets, profiles and other features accessible from a single setup.

4- and 5-axis milling

Suitable for multi-sided features and complex surfaces. The setup depends on tool access and part geometry.

CNC turning

For round parts such as shafts, spacers and bushings, including threaded or grooved features.

CNC machining size and tolerance

Use these figures for preliminary planning. We confirm the usable size, tolerances and lead time for your part when we quote.

SpecificationPlanning reference
Milling envelopeUp to 1,524 × 762 × 508 mm
Turning diameterUp to Ø508 mm
Turning lengthUp to 2,032 mm
General dimensional tolerance±0.127 mm
Tighter dimensional toleranceDown to ±0.025 mm on suitable features with additional processing

The milling envelope depends on the machine and setup. Maximum turning diameter and length are separate limits. Mark any critical fits or tolerances on your drawing.

CNC machining design guidelines

Use these guidelines to check your drawing before requesting a quote. Feasible dimensions depend on the material, geometry and process selected for your part.

Round internal pocket corners

Leave an inside radius where the part allows it. Tight corners can require smaller tools and additional setups. Mark any corners that must stay sharp.

Review deep, narrow pockets

Flag deep, narrow pockets on the drawing so we can check tool access and reach. Include any critical bottom or sidewall finish requirements.

Dimension deep holes

Show the diameter, depth and whether each hole is blind or through. That helps us review drilling access and chip removal.

CNC machining materials

Choose a grade or tell us what the part needs to withstand.

See material options
Aluminum
6061 and 7075 for housings, brackets and fixtures.
Stainless steel
304 and 316L for parts with corrosion resistance requirements.
Steel and plastics
C45, 4140 and POM are also available for review.

Surface finishes for machined parts

Request an as-machined finish, bead blasting, anodizing or powder coating. Mark any surfaces that must be masked or held to a roughness specification.

See our review and inspection process
Close-up of machined metal components

CNC Machining part example

Steel turned parts with machined surfaces

CNC-turned steel flanges

This example shows flanged steel parts with a central bore, a stepped outside diameter and mounting holes. Use a dimensioned drawing to identify the surfaces that locate or mate with the rest of the assembly.

Material shown
Steel. The grade is not specified in the photo source.
What to specify
Bore and outside diameters, flange thickness, bolt circle and any fit or runout requirements.
Inspection to discuss
Bore size and the position of the mounting holes relative to the drawing datums.

Frequently asked questions

What files should I send?

Send a STEP model and a dimensioned PDF when available. Include your material, quantity and finish requirements.

How are machining tolerances confirmed?

Mark the critical dimensions on your drawing. We check achievable tolerances against the material, geometry and inspection needs before quoting.

Can I request prototypes and production quantities?

Yes. Include the quantity you need now and any expected follow-on volume so we can review both.

Get a quote for your part

Send your drawing, quantity and any critical requirements for review.

Upload your drawings